Wichita Falls, TX · Hard Water Specialists
Water Softener Installation in Wichita Falls, TX
Wichita Falls water is classified as very hard — high calcium and magnesium that scales pipes, kills water heaters early, and leaves deposits on every fixture. A properly sized and installed water softener stops the damage and reduces long-term plumbing costs.
- Salt-based ion exchange softeners — the proven method for Wichita Falls hardness
- Salt-free conditioners where sodium is a concern — matched to your household
- Sized for actual household demand, not a generic box from a big-box store
Direct answer
How hard is Wichita Falls water, and does a softener actually fix it?
Wichita Falls water typically tests at 15 to 20+ grains per gallon (GPG), placing it in the very hard to extremely hard category. At that level, scale buildup inside supply lines reduces flow over time, water heater elements and tank walls accumulate mineral deposits that reduce efficiency and lifespan, and fixtures develop hard-to-clean white scale. A salt-based ion exchange softener removes the calcium and magnesium ions that cause hardness, exchanging them for sodium. At properly softened levels (under 1 GPG), scale stops forming, existing light scale in pipes tends to dissolve gradually, and water heater efficiency improves. The softener itself requires a salt refill every few weeks depending on household size, and a regeneration cycle that uses water — a properly sized unit minimizes both.
White scale on every fixture? Water heater replaced earlier than it should have been?
Call (940) 905-8032. We assess your household size, water usage, and current supply quality, recommend the right system, and install it correctly so it actually softens the water rather than just taking up garage space.
Salt-based softeners
Ion exchange — the proven solution for Wichita Falls
Salt-based ion exchange is the only technology that actually removes hardness minerals from the water. The resin tank exchanges calcium and magnesium ions for sodium ions. The resin regenerates periodically using a salt brine, flushing the minerals to drain. For Wichita Falls hardness levels, this is the most effective and most field-proven solution available.
- Removes calcium and magnesium at the point of entry
- Effective at any incoming hardness level
- Protects water heaters, washing machines, and dishwashers
- Reduces soap usage — soft water lathers significantly better
- Requires periodic salt refill (every 4–8 weeks depending on household)
Salt-free conditioners
When sodium is a concern
Salt-free systems (template-assisted crystallisation or TAC) condition the water by changing the form of the hardness minerals so they are less likely to adhere to pipe walls and surfaces. They do not remove the minerals — hardness levels on a test will still read high — but scale formation is significantly reduced. They require no salt, no regeneration cycle, and minimal maintenance.
- No sodium added to the water — better for low-sodium dietary requirements
- No regeneration cycle — no water used for backwash
- Reduces scale formation but does not remove hardness minerals
- Lower maintenance than salt-based systems
- Less effective at very high hardness levels than ion exchange
What we do
Professional installation that actually works
- 01
Water assessment
We test incoming hardness and review household size and usage to size the softener correctly. An undersized unit regenerates too often; an oversized one wastes salt and uses more water.
- 02
System recommendation and written quote
We recommend the right system for your water and household, explain the trade-offs between salt-based and salt-free, and give you a written all-in installation price.
- 03
Point-of-entry installation
The softener is installed on the main supply line after the meter, treating all water entering the home. We bypass the outdoor hose bibs — there is no reason to soften irrigation water.
- 04
Brine tank and bypass valve set up
Brine tank filled and programmed. Bypass valve installed so the system can be isolated for maintenance without cutting water to the house.
- 05
First regeneration and output test
We run the first regeneration cycle and confirm the outlet hardness before leaving. You see the numbers.
Pricing
What does a water softener installation cost in Wichita Falls?
A salt-based whole-home water softener installed by a licensed plumber typically runs $800–$2,000 depending on the unit size, system brand, and installation complexity (drain line routing, bypass valve, cabinet modifications). Salt-free conditioners are in a similar range. We recommend and supply the unit — you do not need to purchase it separately. Written all-in price before work starts.
Service area
Water softener installation across Wichita Falls and the 940
FAQ
Water softener questions
Does softened water affect drinking water taste?
How often does a water softener need salt?
Can I install a water softener I bought myself?
Will a water softener fix iron in the water?
Related services
Also from Discount Plumbing TX
Water Filtration
Whole-home filtration for sediment, chlorine, and other contaminants beyond hardness.
Learn moreWater Heater Repair
Hard water kills water heaters early — repair or replacement before scale causes a full failure.
Learn moreTankless Water Heater
Tankless units benefit significantly from soft water — scale is the primary cause of heat exchanger failure.
Learn moreOne call ends it
Stop paying for hard-water damage and fix it at the source
Assessment, sizing, written quote, professional installation, and a confirmed output test before we leave. Call (940) 905-8032.
Call (940) 905-8032