Wichita Falls, TX · Answered 24/7
Gas Line Services in Wichita Falls, TX
Need a gas plumber? From gas line installation for a new appliance to emergency gas leak detection and repair, our licensed plumbers handle all gas line work with proper permits, pressure testing and code compliance.
- Gas line installation for water heaters, ranges, dryers and fireplaces
- Gas leak detection and emergency gas line repair
- Licensed gas plumber with permits pulled on every job
Direct answer
What gas line work do you handle?
Discount Plumbing TX handles all residential and commercial gas line work in Wichita Falls and the surrounding 940 area. That includes new gas line runs for water heaters, ranges, dryers, outdoor grills and gas fireplaces, as well as gas leak detection, gas line repair and gas line replacement. All gas work is performed by a licensed gas plumber, pressure tested after completion and permitted where required by the local jurisdiction.
Smell gas near an appliance or meter?
Do not use a flame or switch. Open windows, leave the property and call (940) 905-8032 from outside. We will dispatch a licensed gas plumber immediately to locate and stop the leak.
Why it matters
A gas leak is invisible until it is not
Natural gas is odourless on its own. The rotten-egg smell you associate with gas is mercaptan, an additive designed to alert you before concentrations reach a dangerous level. But not every leak produces enough flow to trigger that smell immediately. A small leak at a fitting behind the stove, a pinhole in a corroded black iron section, or a loose flare nut on a dryer connection can seep gas for weeks before the smell becomes noticeable.
That is why gas line work requires a licensed gas plumber who pressure tests every connection and joint rather than relying on smell or soap bubbles alone. Electronic gas detectors measure parts per million and find leaks that a soap test misses.
In Wichita Falls, older homes with original black iron gas piping are the most common source of slow leaks. Corrosion thins the pipe wall from the outside where it contacts damp masonry or soil, and the first sign is often a faint smell near the foundation rather than at an appliance.
Appliance connections
Gas hookups we handle every week
The most common gas line call in Wichita Falls is connecting a new appliance. A gas range needs a flexible connector with a shutoff valve within reach. A gas dryer needs a dedicated line sized for its BTU rating. A gas fireplace or outdoor grill needs a new run from the manifold or meter with proper support, protection at penetrations and a drip leg at the appliance.
Each of these connections is straightforward for a licensed gas plumber but dangerous as a DIY job. Flexible connectors have a limited lifespan, older brass fittings can crack under thermal cycling, and a connection that is finger-tight rather than wrench-tight will eventually leak. We use thread sealant rated for gas, torque fittings to specification and pressure test the completed connection before turning the gas back on.
How the job runs
Our gas line service process
Every gas line job follows the same safety-first sequence.
- 01
Assess the scope
We determine what appliances need gas, the required BTU load, and the best route for the line from the meter or manifold.
- 02
Shut off and isolate
The gas supply is shut off at the meter or the section valve before any fitting is opened or cut.
- 03
Run or repair the line
New pipe is run in black iron or CSST as the application and code require, with proper support intervals and protection at penetrations.
- 04
Pressure test
The completed line is pressurised with air and held for the required duration to confirm every joint and fitting is gas-tight.
- 05
Connect and commission
Appliances are connected with approved connectors, shutoff valves are installed within reach, and each appliance is started and checked for proper operation.
- 06
Permit and inspection
Where the jurisdiction requires a permit, we pull it and schedule the inspection so you do not have to coordinate it yourself.
Warning signs
Signs of a gas line problem
- Rotten egg smell near an appliance, meter or along a wall
- Hissing or whistling near a gas line or fitting
- A gas appliance that lights with a delayed pop or does not light at all
- Yellow or orange flame instead of steady blue on a burner
- Higher than expected gas bills with no change in usage
- Dead vegetation over a buried gas line
- A carbon monoxide detector alarming near a gas appliance
Before we arrive
What to do if you smell gas
- Do not flip any electrical switches, light matches or use your phone inside the house
- Open windows and doors as you leave to ventilate
- Leave the property and move at least 100 feet away
- Call (940) 905-8032 from outside the house
- Do not re-enter until a gas plumber has tested and cleared the area
Why us
Why Wichita Falls homeowners call us for gas work
Licensed gas plumber on every job
Gas line work in Texas requires proper licensing. Every gas job we do is performed by a plumber authorised to work on gas systems.
Pressure tested, every time
Every connection and joint is pressure tested and held before the gas is turned back on. No exceptions.
Electronic leak detection
We use electronic gas detectors that measure parts per million, not just soap bubbles that miss slow leaks.
Permits handled
Where the jurisdiction requires a permit, we pull it, schedule the inspection and close it out so it is not left hanging.
Appliance commissioning included
We start each connected appliance, verify flame pattern, check for drafting issues and confirm the shutoff valve works before we leave.
Gas lines in Wichita Falls
Older homes and gas line corrosion in the 940
Wichita Falls has a large stock of mid-century homes that were built with black iron gas piping. Black iron is strong and code-appropriate, but it corrodes from the outside when it contacts soil or damp masonry. Homes with gas lines running through crawl spaces, under slabs or against exterior walls in unprotected conditions are the most common source of slow gas leaks in this area.
We also see a fair number of homes where previous work was done without a permit, leaving gas connections that were never pressure tested or inspected. If you are buying a home, a gas line inspection is worth doing alongside your sewer camera inspection.
Pricing
What does gas line work cost in Wichita Falls?
Gas line costs depend on the length of the run, the size of the line, how many appliances it serves and whether the work is new installation or repair of an existing line. A simple appliance hookup costs less than a full new run from the meter.
We quote every gas line job in writing before any work starts, including permit fees. Call (940) 905-8032 for a specific estimate.
Service area
Local plumbers near you in Wichita Falls and surrounding towns
This service is available across our full service area at the same affordable rates. Pick your town for local detail.
FAQ
Questions we get asked on the phone
How do I know if I have a gas leak?
Can you convert my electric water heater to gas?
Do you install gas lines for outdoor kitchens and grills?
Is gas line work permitted in Wichita Falls?
Related services
Other work that often comes with this job
Water Heater Repair & Installation
Repair, replacement and code-correct installs for gas, electric and tankless.
Read moreLeak Detection & Repair
Acoustic and thermal location so the repair is targeted, not exploratory.
Read moreEmergency Plumbing
Live answer around the clock for failures that cannot wait until morning.
Read moreOne call ends it
Gas line problems do not wait
A gas leak or a failed appliance connection needs a licensed gas plumber, not a handyman. Call (940) 905-8032 and get a plumber who carries the right detection equipment, pulls the permit and pressure tests every joint.
Call (940) 905-8032